EQUIPMENT GUIDE

How Much Does a Smith Machine Bar Weigh? Figures by Brand

6 min readโ€ขUpdated November 2026

Short answer

There is no standard Smith machine bar weight. The starting weights manufacturers publish for commercial machines range from 5 kg (11 lb) to 20 kg (44 lb), and many sit between 11 and 16 kg (25 to 35 lb). That is lighter than a 20 kg Olympic bar, because most Smith bars are counterbalanced. Check the sticker on the frame, ask the staff for the model, or measure it.

On a free barbell, the answer is easy: 20 kg, or 45 lb in an American gym. A Smith machine bar is fixed to a frame and often hooked up to a hidden counterweight, so what you lift is not the barโ€™s real weight but its starting weight, sometimes called starting resistance. That figure changes from one make to the next, which is why your Smith machine bench can feel easy in one gym and heavy in another.

Starting weights by brand

These are the figures the manufacturers publish for their commercial Smith machines. Older models and home machines will differ, and gyms sometimes keep machines for many years, so treat this as a guide and check the machine in front of you.

MachineStarting weightNotes
Precor Smith Machine (VBR6802)5 kg (11 lb)Precor sell sheet. 7ยฐ bar path.
Matrix Magnum Smith Machine (MG-PL62)11.3 kg (25 lb)Counterbalanced bar. Vertical path.
Matrix Angled Smith Machine (VY-M49)11.3 kg (25 lb)Counterbalanced bar. Angled path.
Hammer Strength Smith Machine13.6 kg (30 lb)Listed by Life Fitness as starting resistance.
Precor Discovery Plate Loaded Smith (DPL0802)15 to 16 kg (33 to 35 lb)Precor lists both figures. 11ยฐ bar path.
Matrix Smith Machine (G1-FW161)20 kg (44 lb)Listed by Matrix as starting weight.

Life Fitness also makes a Signature Series Smith Machine with the counterweight hidden inside the frame, but does not publish a starting weight for it on its product page.

Why the weight varies so much

Counterbalanced bars

Most commercial Smith machines connect the bar to a weight inside the frame by a cable. The counterweight takes some of the barโ€™s load, so the steel bar and its hooks might weigh 20 kg or more while you only lift 11 kg of it. That is why figures in the table sit well below a standard barbell.

Bars without a counterweight

Some machines, especially cheaper and home models, have no counterweight at all, so you lift the full weight of the bar and its carriage. Those bars tend to be heavier than a counterbalanced one.

The angle makes almost no difference

Many Smith machines run on a slight angle, often 7 degrees, to suit a more natural squat or press. At that angle the load you lift changes by less than 1 percent, so do not worry about it. Friction in the bearings has a bigger effect, and that varies with how well the machine has been looked after.

How to find out what your gymโ€™s machine weighs

  1. Look for the sticker. Many machines have a placard on the frame showing the starting weight or starting resistance, often in both kilos and pounds.
  2. Find the model. The brand name is usually on the uprights. Ask the staff for the model and look up the manufacturerโ€™s spec sheet.
  3. Measure it. Set the safety stops low, put a bathroom scale on a box or step under the bar, and lower the empty bar onto it gently. The reading is a rough guide to the starting weight. Friction means it will not be exact.

Training abroad? In an American gym the sticker is likely to show pounds. Our kg to lbs gym conversion chart has plates, bars and dumbbells converted both ways.

Should you count the bar?

If you know the starting weight, count it: it is part of what you lift. More important than the exact number, though, is consistency.

  • Pick a rule and stick to it. Either always add the bar or never add it, so your log lines up from week to week.
  • Note the machine. A 60 kg Smith squat on one machine is not the same as 60 kg on another. Write down the gym or the make next to the set.
  • Keep Smith and free-weight numbers apart. The fixed path means you do not have to balance the bar, so the two are not directly comparable even with the same plates on.
  • Start lighter on a new machine. Use your first set to feel out the starting weight and how smoothly it runs.

No Smith machine at your gym?

The Smith machine is a common swap for squats and presses, but not every gym has one. Our hack squat alternatives guide covers the other ways to train your quads on a fixed path, and planning a workout for a new gym has swaps for every movement pattern. On GymMaps you can check a gymโ€™s equipment list and member photos before you go, and filter the map by the kit you need.

The short version: a Smith machine bar has no standard weight. Published starting weights for commercial machines run from 5 to 20 kg (11 to 44 lb), and many are 11 to 16 kg (25 to 35 lb). Check the sticker or model, count it consistently, and log which machine you used.

Frequently asked questions

How much does a Smith machine bar weigh?

There is no standard. The starting weights manufacturers publish for commercial Smith machines run from 5 kg (11 lb) to 20 kg (44 lb), and many sit between 11 and 16 kg (25 to 35 lb). Most are lighter than a 20 kg Olympic bar because the bar is counterbalanced. Check the sticker on the machine, ask the staff, or measure it.

Is a Smith machine bar 20 kg like an Olympic bar?

Usually not. The bar is fixed to the frame, often with a counterweight hidden inside it, so what you feel is the starting resistance, not the barโ€™s real weight. Of the commercial machines in our table, only one lists 20 kg.

Should I count the Smith machine bar in my total?

Yes, if you know the starting weight, because it is part of what you are lifting. What matters most is being consistent: either always add it or never add it, and note which machine you used.

Why does the same weight feel lighter on a Smith machine?

Two reasons. The starting weight is often lower than a free barbell, and the fixed path means you do not have to balance the bar. Your Smith machine numbers and free-weight numbers are not directly comparable, so track them separately.

Does the angle of a Smith machine change the weight?

Barely. Many machines run on a slight angle of about 7 degrees, which changes the load you lift by less than 1 percent. The starting weight and the counterbalance make a far bigger difference.

How can I find out what my gymโ€™s Smith machine weighs?

Look for a sticker or placard on the frame, often labelled starting weight or starting resistance. If there is none, ask the staff for the make and model and look it up, or rest the empty bar on a bathroom scale on the safety stops for a rough reading.

Find a gym with the kit you need

GymMaps shows each gymโ€™s equipment, member photos, opening hours and day pass prices, and lets you filter the map by equipment.

Download GymMaps

Get new gym guides in your inbox

Travel tips, training advice, and new articles. No spam.

Read next

Training Guide
Kg to Lbs Gym Conversion Chart: Plates, Bars & Dumbbells โ†’
Equipment Guide
Hack Squat & Pendulum Squat Alternatives: 7 Substitutes That Work โ†’
Equipment Guide
Hammer Strength: History, Signature Machines & Why Lifters Love It (2026) โ†’
Reference
Gym Equipment Glossary โ†’
โ† Back to all posts